Search Results

Search found 13033 results on 522 pages for '12 04'.

Page 216/522 | < Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >

• Using smartctl to get vendor specific Attributes from ssd drive behind a SmartArray P410 controller

  - by Lairsdragon

  Hi! Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar. Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive. In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller. smartctl on directly connected ssd: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0 4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29 232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0 225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509 226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0 227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 smartctl on P410 connected ssd: # ./smartctl -A -d cciss,0 /dev/cciss/c1d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net (Right, it is complety empty) smartctl on P410 connected hdd: # ./smartctl -A -d cciss,0 /dev/cciss/c0d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Current Drive Temperature: 27 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1871654030 Blocks received from initiator = 1360012929 Blocks read from cache and sent to initiator = 2178203797 Number of read and write commands whose size <= segment size = 46052239 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 3363.25 number of minutes until next internal SMART test = 12 Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?

  Read the article

• m23 vs webmin vs landscape vs whatever you can propose, I need software to mantain a bunch of debian

  - by marc.riera

  Hello, I know there is landscape from canonical, but it has some $$ costs. Als there is webmin, and it can be used as a cluster management tool. Also there is m23, probably the most usable and interesting peace of manager software. But, what would you suggest to install and use on following configuration: 1) 100 desktop users, against an AD with quest authentication services installed. (ubunt8.04,9.04,9.10,10.04) 2) 50 servers (debian sid, lenny , ubuntu 8.04 and 10.04) We work on different software, so each group of persons need different configurations, each server has different pourposses, nothing is clusterized. And we have a good enough backup software. So , my objectives are: - easy install (deploy) - good reporting - easy logonscripts for users - easy bootupscripts for servers Thanks all for reading, and more thanks for your time. Marc

  Read the article

• getting warning messages "avahi-daemon[3201]: Invalid query packet." on suse 10.1 server with raid 1

  - by jarus

  I had recently replaced a failing hard drive on my software raid 1 system with suse 10.1 , and i am checking for any warning messages on " var/log/warn " and i found this message "avahi-daemon[3201]: Invalid query packet." more than 12 times , i am new to these stuff , should i be concerned , is there something wrong with the system , can i check anywhere else to find out if there is any problem with the system. Any help will be greatly appreciated. Thanx in advance.

  Read the article

• How to have Windows Server DNS use hosts file to resolve specific host names

  - by user41079

  Hello, everyone, I'm facing a small problem with Windows Server 2003 DNS service. In my corporation, I'm running Microsoft DNS server(172.16.0.12) to do name resolution to my company intranet(domain name ends in dev.nls. resolving to IP 172.16..), and it is also configured as a DNS forwarder to forward other domain names(e.g. *.google.com , *.sf.net) to Internet real DNS servers. This internal DNS server never tends to serve users from outside world. And, we are running a mail server(serving incoming mail for a real Internet domain @nlscan.com) inside company firewall which can be accessed in either way: by connecting to 172.16.0.10 from within intranet. by connecting to mail.nlscan.com(resolved to 202.101.116.9) from Internet. Note that 172.16.0.10 and 202.101.116.9 is not the same physical machine. The 202 one is a firewall machine who do port forwarding of port 25 and 110 to intranet address 172.16.0.10 . Now my question: If users inside corporate LAN want to resolve mail.nlscan.com, it resolves to 202.101.116.9. That's correct and workable, BUT NOT GOOD, because the mail traffic goes to the firewall machine then bounces to 172.16.0.10 . I hope that our internal DNS server can intercept the name mail.nlscan.com and resolve it to 172.16.0.10 . So, I hope that I can write an entry in "hosts" file on 172.16.0.12 to do this. But, how can Microsoft DNS server recognize this "hosts" file? Maybe you suggest, why not have intranet user use 172.16.0.10 to access my mail server? I have to say it is inconvenient, suppose a user(employee) works on his laptop, daytime in office and nighttime at home. When he is at home, he cannot use 172.16.0.10 . Creating a zone for nlscan.com on our internal DNS server is not feasible, because the name server for nlscan.com domain is on our ISP, and it is responsible for resolving other host names and sub-domains under nlscan.com . Thank you in advance.

  Read the article

• Poor WAMP performance when using SMB/UNC Paths

  - by Brad

  I've configured a WAMP (Windows Apache MySQL and PHP) stack when when configured to use local storage takes 3-4 seconds to load. When I use an SMB/UNC share it takes 12-15 seconds to load. Here are the two lines in my httpd.conf: #DocumentRoot "//10.99.108.11/test_htdocs" #<Directory "//10.99.108.11/test_htdocs"> #DocumentRoot "C:/www" #<Directory "C:/www"> Is there performance tuning I can do on windows server 2008 R2 to improve performance or is there another way to improve performance using smb

  Read the article

• How to connect to a Linux server via SSH using Lazarus?

  - by Altar

  Hi, I need to work (run/edit/delete files) with 12 Linux computer nodes in a cluster. Usually I use SSH to connect to those nodes. How can I do this from Lazarus? I have tried the 2nd and 3rd TProcess example posted on Lazarus' wiki page (http://wiki.lazarus.freepascal.org/Executing%5FExternal%5FPrograms) but it is not working with SSH (but it is working with 'ls'). Any ideas how to make SSH work with Lazarus? (I am on Linux)

  Read the article

• Lot of FIN_WAIT2, CLOSE_WAIT , LAST_ACK and TIME_WAIT in Haproxy

  - by Tux

  We are running haproxy in production for around 10k+ concurrent users . But we are seeing lot of FIN_WAIT2, CLOSE_WAIT , LAST_ACK and TIME_WAIT in the netstat output. This output is on a 8G ubuntu-12.04 node. 8046 CLOSE_WAIT 1 CLOSING 1 established) 40869 ESTABLISHED 1212 FIN_WAIT1 7575 FIN_WAIT2 1 Foreign 2252 LAST_ACK 7 LISTEN 143 SYN_RECV 4920 TIME_WAIT Can someone please tell me what tweaking i need to do. Please note that all these connections are persistent connections . tcp_fin_timeout = 30 tcp_keepalive_time = 1800 Right now, the application is working fine. But wondering will be there any issues as we add more users to this haproxy node.

  Read the article

• Slow Memcached: Average 10ms memcached `get`

  - by Chris W.

  We're using Newrelic to measure our Python/Django application performance. Newrelic is reporting that across our system "Memcached" is taking an average of 12ms to respond to commands. Drilling down into the top dozen or so web views (by # of requests) I can see that some Memcache get take up to 30ms; I can't find a single use of Memcache get that returns in less than 10ms. More details on the system architecture: Currently we have four application servers each of which has a memcached member. All four memcached members participate in a memcache cluster. We're running on a cloud hosting provider and all traffic is running across the "internal" network (via "internal" IPs) When I ping from one application server to another the responses are in ~0.5ms Isn't 10ms a slow response time for Memcached? As far as I understand if you think "Memcache is too slow" then "you're doing it wrong". So am I doing it wrong? Here's the output of the memcache-top command: memcache-top v0.7 (default port: 11211, color: on, refresh: 3 seconds) INSTANCE USAGE HIT % CONN TIME EVICT/s GETS/s SETS/s READ/s WRITE/s cache1:11211 37.1% 62.7% 10 5.3ms 0.0 73 9 3958 84.6K cache2:11211 42.4% 60.8% 11 4.4ms 0.0 46 12 3848 62.2K cache3:11211 37.5% 66.5% 12 4.2ms 0.0 75 17 6056 170.4K AVERAGE: 39.0% 63.3% 11 4.6ms 0.0 64 13 4620 105.7K TOTAL: 0.1GB/ 0.4GB 33 13.9ms 0.0 193 38 13.5K 317.2K (ctrl-c to quit.) ** Here is the output of the top command on one machine: ** (Roughly the same on all cluster machines. As you can see there is very low CPU utilization, because these machines only run memcache.) top - 21:48:56 up 1 day, 4:56, 1 user, load average: 0.01, 0.06, 0.05 Tasks: 70 total, 1 running, 69 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.3%st Mem: 501392k total, 424940k used, 76452k free, 66416k buffers Swap: 499996k total, 13064k used, 486932k free, 181168k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 6519 nobody 20 0 384m 74m 880 S 1.0 15.3 18:22.97 memcached 3 root 20 0 0 0 0 S 0.3 0.0 0:38.03 ksoftirqd/0 1 root 20 0 24332 1552 776 S 0.0 0.3 0:00.56 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 5 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kworker/u:0 6 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0.0 0.0 0:00.62 watchdog/0 8 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cpuset 9 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper ...output truncated...

  Read the article

• High Jitter in NTP and poll value never goes above 128

  - by Aseem

  I have a lot of servers syncing to the same NTP servers (4). Not every server is in the same LAN. Some are 3 hops away from the NTP servers and some are 6 hops away. On couple of servers I see that the poll value never touches the 1024 mark and the jitter value is in double digits. Could it be due to the system hardware? These are windows servers (physical) and require as accurate time as possible. Please advice what I should do. Some of the stats that I collected manually from the bad box (which is 6 hops away from the ntp servers) C:\Program Files (x86)\NTP>ntpq -p -n remote refid st t when poll reach delay offset jitter ============================================================================== +*.*.*.25 *.*.*.233 2 u 12 128 377 1.210 -12.579 14.913 +*.*.*.26 *.*.*.233 2 u 96 128 377 1.067 -2.235 9.885 **.*.*.27 *.*.*.233 2 u 24 128 377 1.038 -7.569 11.178 +*.*.*.28 *.*.*.233 2 u 49 128 377 1.288 -11.058 14.544 remote refid st t when poll reach delay offset jitter ============================================================================== +*.*.*.25 *.*.*.233 2 u 124 128 377 0.614 -6.212 5.329 +*.*.*.26 *.*.*.233 2 u 93 128 377 0.910 -9.431 3.111 +*.*.*.27 *.*.*.233 2 u 1 128 377 0.824 -7.428 3.129 **.*.*.28 *.*.*.233 2 u 84 128 377 1.503 -8.230 3.511 remote refid st t when poll reach delay offset jitter ============================================================================== **.*.*.25 *.*.*.233 2 u 117 128 377 1.235 -4.084 11.405 +*.*.*.26 *.*.*.233 2 u 96 128 377 1.335 -11.813 13.130 +*.*.*.27 *.*.*.233 2 u 130 128 377 1.549 -14.036 16.381 -*.*.*.28 *.*.*.233 2 u 79 128 377 1.258 13.395 22.203 remote refid st t when poll reach delay offset jitter ============================================================================== **.*.*.25 *.*.*.233 2 u 88 128 377 1.235 -4.084 14.068 +*.*.*.26 *.*.*.233 2 u 63 128 377 1.335 -11.813 17.086 +*.*.*.27 *.*.*.233 2 u 103 128 377 1.549 -14.036 20.691 -*.*.*.28 *.*.*.233 2 u 47 128 377 1.258 13.395 20.231 remote refid st t when poll reach delay offset jitter ============================================================================== +*.*.*.25 *.*.*.233 2 u 47 64 377 0.652 -15.805 14.077 **.*.*.26 *.*.*.233 2 u 11 64 377 1.013 -14.423 11.375 -*.*.*.27 *.*.*.233 2 u 63 64 377 0.765 -2.030 7.680 +*.*.*.28 *.*.*.233 2 u 4 64 377 1.191 -17.980 14.393 remote refid st t when poll reach delay offset jitter ============================================================================== -*.*.*.25 *.*.*.233 2 u 3 128 377 1.576 18.665 21.999 +*.*.*.26 *.*.*.233 2 u 73 128 377 0.637 -5.012 14.405 **.*.*.27 *.*.*.233 2 u 127 128 377 0.272 -8.237 14.438 +*.*.*.28 *.*.*.233 2 u 123 128 377 1.190 -14.383 18.875 C:\Program Files (x86)\NTP>ntpdc -c loopinfo offset: -0.016430 s frequency: 7.106 ppm poll adjust: 18 watchdog timer: 133 s offset: -0.016430 s frequency: 7.106 ppm poll adjust: 18 watchdog timer: 341 s offset: -0.000149 s frequency: 6.645 ppm poll adjust: 0 watchdog timer: 383 s offset: 0.015735 s frequency: 6.725 ppm poll adjust: 7 watchdog timer: 577 s offset: -0.010331 s frequency: 6.748 ppm poll adjust: 21 watchdog timer: 567 s offset: -0.009427 s frequency: 6.687 ppm poll adjust: 28 watchdog timer: 301 s offset: -0.007361 s frequency: 6.612 ppm poll adjust: 30 watchdog timer: 155 s offset: -0.008106 s frequency: 4.358 ppm poll adjust: 30 watchdog timer: 291 s NTP.conf # NTP configuration file # Use drift file driftfile "C:\Program Files (x86)\NTP\ntp.drift" # Logs statistics loopstats peerstats clockstats statsdir "C:\Program Files (x86)\NTP\logs\" # directory for statistics files filegen peerstats file peerstats type day enable filegen loopstats file loopstats type day enable filegen clockstats file clockstats type day enable logfile "C:\Program Files (x86)\NTP\logs\syslog.txt" # Use specific NTP servers server *.*.*.25 minpoll 4 maxpoll 7 iburst server *.*.*.26 minpoll 4 maxpoll 7 iburst server *.*.*.27 minpoll 4 maxpoll 7 iburst server *.*.*.28 minpoll 4 maxpoll 7 iburst

  Read the article

• Unable to use "Manage Content and Structure" after removing Project server form the SharePoint farm

  - by Brian

  We're no longer using Office Project Server, and I've removed it from the farm in which it was installed. However, now that it's been removed, I am unable to access the "Manage Content and Structure" link on some of our SharePoint sites. I get an error indicating that SharePoint Failed to find the XML file at location '12\Template\Features\PWSCommitments\feature.xml' Anyone have an idea how to fix this?

  Read the article

• Solaris Non global Zone x server

  - by ankimal

  I am not even sure if this is possible but how can I start an X server on a non-global zone? If I run startx from within my zone. I created the xorg.conf by running /usr/X11/bin/xorgconfig root@foo:/usr/X11/bin# startx xauth: creating new authority file /root/.serverauth.20957 X.Org X Server 1.5.3 Release Date: 5 November 2008 X Protocol Version 11, Revision 0 Build Operating System: SunOS 5.11 snv_108 i86pc Current Operating System: SunOS dsol101 5.11 snv_111b i86pc Build Date: 07 May 2009 04:44:56PM Solaris ABI: 64-bit SUNWxorg-server package version: 6.9.0.5.11.11100,REV=0.2009.05.07 SUNWxorg-mesa package version: 6.9.0.5.11.11100,REV=0.2009.04.02 Before reporting problems, check http://sunsolve.sun.com/ to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 10 19:17:53 2009 (==) Using config file: "/etc/X11/xorg.conf" Fatal server error: xf86OpenConsole: Cannot open /dev/fb (No such file or directory)

  Read the article

• SAS Expanders vs Direct Attached (SAS)?

  - by jemmille

  I have a storage unit with 2 backplanes. One backplane holds 24 disks, one backplane holds 12 disks. Each backplane is independently connected to a SFF-8087 port (4 channel/12Gbit) to the raid card. Here is where my question really comes in. Can or how easily can a backplane be overloaded? All the disks in the machine are WD RE4 WD1003FBYX (black) drives that have average writes at 115MB/sec and average read of 125 MB/sec I know things would vary based on the raid or filesystem we put on top of that but it seems to be that a 24 disk backplane with only one SFF-8087 connector should be able to overload the bus to a point that might actually slow it down? Based on my math, if I had a RAID0 across all 24 disks and asked for a large file, I should, in theory should get 24*115 MB/sec wich translates to 22.08 GBit/sec of total throughput. Either I'm confused or this backplane is horribly designed, at least in a perfomance environment. I'm looking at switching to a model where each drive has it's own channel from the backplane (and new HBA's or raid card). EDIT: more details We have used both pure linux (centos), open solaris, software raid, hardware raid, EXT3/4, ZFS. Here are some examples using bonnie++ 4 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 194MB/s 19% 92MB/s 11% 200MB/s 8% 310/sec 194MB/s 19% 93MB/s 11% 201MB/s 8% 312/sec --------- ---- --------- ---- --------- ---- --------- 389MB/s 19% 186MB/s 11% 402MB/s 8% 311/sec 8 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 324MB/s 32% 164MB/s 19% 346MB/s 13% 466/sec 324MB/s 32% 164MB/s 19% 348MB/s 14% 465/sec --------- ---- --------- ---- --------- ---- --------- 648MB/s 32% 328MB/s 19% 694MB/s 13% 465/sec 12 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 377MB/s 38% 191MB/s 22% 429MB/s 17% 537/sec 376MB/s 38% 191MB/s 22% 427MB/s 17% 546/sec --------- ---- --------- ---- --------- ---- --------- 753MB/s 38% 382MB/s 22% 857MB/s 17% 541/sec Now 16 Disk RAID-0, it's gets interesting WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 359MB/s 34% 186MB/s 22% 407MB/s 18% 1397/sec 358MB/s 33% 186MB/s 22% 407MB/s 18% 1340/sec --------- ---- --------- ---- --------- ---- --------- 717MB/s 33% 373MB/s 22% 814MB/s 18% 1368/sec 20 Disk RAID-0, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 371MB/s 37% 188MB/s 22% 450MB/s 19% 775/sec 370MB/s 37% 188MB/s 22% 447MB/s 19% 797/sec --------- ---- --------- ---- --------- ---- --------- 741MB/s 37% 376MB/s 22% 898MB/s 19% 786/sec 24 Disk RAID-1, ZFS WRITE CPU RE-WRITE CPU READ CPU RND-SEEKS 347MB/s 34% 193MB/s 22% 447MB/s 19% 907/sec 347MB/s 34% 192MB/s 23% 446MB/s 19% 933/sec --------- ---- --------- ---- --------- ---- --------- 694MB/s 34% 386MB/s 22% 894MB/s 19% 920/sec 28 Disk RAID-0, ZFS 32 Disk RAID-0, ZFS 36 Disk RAID-0, ZFS More details: Here is the exact unit: http://www.supermicro.com/products/chassis/4U/847/SC847E1-R1400U.cfm

  Read the article

• Changed login for a user with encrypted home, now I can't login

  - by HappyDeveloper

  I changed a user's login by doing this: $ usermod old_login -l new_login I also wanted to move his home to reflect his new username, but it wouldn't let me, so I just rebooted. But now after I login, the screen blinks and I'm redirected back to the login screen. And that's what happens when you cannot access your home, that's why I think it has something to do with his home being encrypted. How do I fix this? I'm on a Ubuntu 12 Virtualbox VM.

  Read the article

• Need a Company to Fix My Plesk & IIS on windows 2008 [SOLVED]

  - by DevCompany

  Hello: I need to know a name of a company to fix my server install and get my sites running again. Windows 2008 IIS 7 Plesk 9.x The problem started when Level 2 of my hosting company adjusted a FTP users to have certain permissions....apparently he did this outside of plesk and it has been nothing but permission headaches all around. Connections....uploading files, etc. now somethings gone wrong where plesk isnt even loading properly and IIS too... I need to see if someone can fix this remotely before I give the green light to format and reinstall server, IIS, Plesk and Domains! looking to pay a company to get this working ASAP - This is not requested as a free job so I need someone good and who can fix it without the huge hassle of formatting and such. Need to resolve today Post expires on Monday 04-26-20010

  Read the article

• I cannot access my mongodb from internet ,Anybody can help me?

  - by VicoWu110

  I am using Mongodb database ,which is installed in my ubuntu with the ip address 126.22.252.25. The ubuntu version info is Ubuntu 12.04.3 LTS. My mongodb use the default 27017 port .On this local machine , I can use command "mongo --host 126.22.252.25" on the local machine to access, but I cannot use this command on any other linux mathine to access the db,nor can I use "telnet 126.22.252.25 27017" on my windows machine.I am sure 126.22.252.25 machine is accessable from internet because I can use winSCP and secureCRT to login to it.I run command "netstat -tnlp" , it shows below: tcp 0 0 0.0.0.0:27017 0.0.0.0:* LISTEN I have already change the /ect/mongodb.conf file , modifying bind_ip parameter from 0.0.0.0 to 126.22.252.25 So ,anyone can help me?

  Read the article

• tmux: Suddenly, cannot horizontally split

  - by A__A__0

  As root, using a reasonably default .profile and .shrc and an empty tmux.conf, I am unable to split the window horizontally. There are a number of cases to consider so I'll list them clearly. Using the keybinding + empty configuration: nothing happens Using the keybinding + my configuration: a bell is generated, nothing else; occasionally, the split will appear and disappear immediately (maybe it always does this, but I'm connecting over ssh so it may not make it through) Using tmux split-window -h with any config: tmux immediately exits I've posted here in order the server and client verbose logs generated by tmux -v during the third case: server started, pid 9523 socket path /tmp/tmux-0/default new client 7 got 100 from client 7 got 101 from client 7 got 102 from client 7 got 103 from client 7 got 104 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 106 from client 7 got 200 from client 7 cmdq 0x801c6e080: new-session (client 7) new term: xterm xterm override: XT xterm override: Ms ]52;%p1%s;%p2%s xterm override: Cs ]12;%p1%s xterm override: Cr ]112 xterm override: Ss [%p1%d q xterm override: Se [2 q new key Oo: 0x1021 (KP/) new key Oj: 0x1022 (KP*) new key Om: 0x1023 (KP-) new key Ow: 0x1024 (KP7) new key Ox: 0x1025 (KP8) new key Oy: 0x1026 (KP9) new key Ok: 0x1027 (KP+) new key Ot: 0x1028 (KP4) new key Ou: 0x1029 (KP5) new key Ov: 0x102a (KP6) new key Oq: 0x102b (KP1) new key Or: 0x102c (KP2) new key Os: 0x102d (KP3) new key OM: 0x102e (KPEnter) new key Op: 0x102f (KP0) new key On: 0x1030 (KP.) new key OA: 0x101d (Up) new key OB: 0x101e (Down) new key OC: 0x1020 (Right) new key OD: 0x101f (Left) new key [A: 0x101d (Up) new key [B: 0x101e (Down) new key [C: 0x1020 (Right) new key [D: 0x101f (Left) new key OH: 0x1018 (Home) new key OF: 0x1019 (End) new key [H: 0x1018 (Home) new key [F: 0x1019 (End) new key Oa: 0x501d (C-Up) new key Ob: 0x501e (C-Down) new key Oc: 0x5020 (C-Right) new key Od: 0x501f (C-Left) new key [a: 0x901d (S-Up) new key [b: 0x901e (S-Down) new key [c: 0x9020 (S-Right) new key [d: 0x901f (S-Left) new key [11^: 0x5002 (C-F1) new key [12^: 0x5003 (C-F2) new key [13^: 0x5004 (C-F3) new key [14^: 0x5005 (C-F4) new key [15^: 0x5006 (C-F5) new key [17^: 0x5007 (C-F6) new key [18^: 0x5008 (C-F7) new key [19^: 0x5009 (C-F8) new key [20^: 0x500a (C-F9) new key [21^: 0x500b (C-F10) new key [23^: 0x500c (C-F11) new key [24^: 0x500d (C-F12) new key [25^: 0x500e (C-F13) new key [26^: 0x500f (C-F14) new key [28^: 0x5010 (C-F15) new key [29^: 0x5011 (C-F16) new key [31^: 0x5012 (C-F17) new key [32^: 0x5013 (C-F18) new key [33^: 0x5014 (C-F19) new key [34^: 0x5015 (C-F20) new key [2^: 0x5016 (C-IC) new key [3^: 0x5017 (C-DC) new key [7^: 0x5018 (C-Home) new key [8^: 0x5019 (C-End) new key [6^: 0x501a (C-NPage) new key [5^: 0x501b (C-PPage) new key [11$: 0x9002 (S-F1) new key [12$: 0x9003 (S-F2) new key [13$: 0x9004 (S-F3) new key [14$: 0x9005 (S-F4) new key [15$: 0x9006 (S-F5) new key [17$: 0x9007 (S-F6) new key [18$: 0x9008 (S-F7) new key [19$: 0x9009 (S-F8) new key [20$: 0x900a (S-F9) new key [21$: 0x900b (S-F10) new key [23$: 0x900c (S-F11) new key [24$: 0x900d (S-F12) new key [25$: 0x900e (S-F13) new key [26$: 0x900f (S-F14) new key [28$: 0x9010 (S-F15) new key [29$: 0x9011 (S-F16) new key [31$: 0x9012 (S-F17) new key [32$: 0x9013 (S-F18) new key [33$: 0x9014 (S-F19) new key [34$: 0x9015 (S-F20) new key [2$: 0x9016 (S-IC) new key [3$: 0x9017 (S-DC) new key [7$: 0x9018 (S-Home) new key [8$: 0x9019 (S-End) new key [6$: 0x901a (S-NPage) new key [5$: 0x901b (S-PPage) new key [11@: 0xd002 (C-S-F1) new key [12@: 0xd003 (C-S-F2) new key [13@: 0xd004 (C-S-F3) new key [14@: 0xd005 (C-S-F4) new key [15@: 0xd006 (C-S-F5) new key [17@: 0xd007 (C-S-F6) new key [18@: 0xd008 (C-S-F7) new key [19@: 0xd009 (C-S-F8) new key [20@: 0xd00a (C-S-F9) new key [21@: 0xd00b (C-S-F10) new key [23@: 0xd00c (C-S-F11) new key [24@: 0xd00d (C-S-F12) new key [25@: 0xd00e (C-S-F13) new key [26@: 0xd00f (C-S-F14) new key [28@: 0xd010 (C-S-F15) new key [29@: 0xd011 (C-S-F16) new key [31@: 0xd012 (C-S-F17) new key [32@: 0xd013 (C-S-F18) new key [33@: 0xd014 (C-S-F19) new key [34@: 0xd015 (C-S-F20) new key [2@: 0xd016 (C-S-IC) new key [3@: 0xd017 (C-S-DC) new key [7@: 0xd018 (C-S-Home) new key [8@: 0xd019 (C-S-End) new key [6@: 0xd01a (C-S-NPage) new key [5@: 0xd01b (C-S-PPage) new key [I: 0x1031 ((null)) new key [O: 0x1032 ((null)) new key OP: 0x1002 (F1) new key OQ: 0x1003 (F2) new key OR: 0x1004 (F3) new key OS: 0x1005 (F4) new key [15~: 0x1006 (F5) new key [17~: 0x1007 (F6) new key [18~: 0x1008 (F7) new key [19~: 0x1009 (F8) new key [20~: 0x100a (F9) new key [21~: 0x100b (F10) new key [23~: 0x100c (F11) new key [24~: 0x100d (F12) new key [2~: 0x1016 (IC) new key [3~: 0x1017 (DC) replacing key OH: 0x1018 (Home) replacing key OF: 0x1019 (End) new key [6~: 0x101a (NPage) new key [5~: 0x101b (PPage) new key [Z: 0x101c (BTab) replacing key OA: 0x101d (Up) replacing key OB: 0x101e (Down) replacing key OD: 0x101f (Left) replacing key OC: 0x1020 (Right) spawn: /bin/sh -- session 0 created writing 207 to client 7 got 208 from client 7 input_parse: '#' ground input_parse: ' ' ground keys are 7 ([?1;2c) received service class 1 complete key [?1;2c 0xfff keys are 1 (t) complete key t 0x74 input_parse: 't' ground keys are 1 (m) complete key m 0x6d input_parse: 'm' ground keys are 1 (u) complete key u 0x75 input_parse: 'u' ground keys are 1 (x) complete key x 0x78 input_parse: 'x' ground keys are 1 ( ) complete key 0x20 input_parse: ' ' ground keys are 1 (s) complete key s 0x73 input_parse: 's' ground keys are 1 (p) complete key p 0x70 input_parse: 'p' ground keys are 1 (l) complete key l 0x6c input_parse: 'l' ground keys are 1 (i) complete key i 0x69 input_parse: 'i' ground keys are 1 (t) complete key t 0x74 input_parse: 't' ground keys are 1 (-) complete key - 0x2d input_parse: '-' ground keys are 1 (d) complete key d 0x64 input_parse: 'd' ground keys are 1 () complete key 0x7f input_parse: '' ground input_c0_dispatch: ' input_parse: '' ground input_parse: '[' esc_enter input_parse: 'K' csi_enter input_csi_dispatch: 'K' "" "" keys are 1 (w) complete key w 0x77 input_parse: 'w' ground keys are 1 (i) complete key i 0x69 input_parse: 'i' ground keys are 1 (n) complete key n 0x6e input_parse: 'n' ground keys are 1 (d) complete key d 0x64 input_parse: 'd' ground keys are 1 (o) complete key o 0x6f input_parse: 'o' ground keys are 1 (w) complete key w 0x77 input_parse: 'w' ground keys are 1 ( ) complete key 0x20 input_parse: ' ' ground keys are 1 (-) complete key - 0x2d input_parse: '-' ground keys are 1 (h) complete key h 0x68 input_parse: 'h' ground keys are 1 ( ) complete key 0xd input_parse: ' ' ground input_c0_dispatch: ' input_parse: ' ' ground input_c0_dispatch: ' new client 13 got 100 from client 13 got 101 from client 13 got 102 from client 13 got 103 from client 13 got 104 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 106 from client 13 got 200 from client 13 cmdq 0x801c6e160: split-window -h (client 13) spawn: /bin/sh -- writing 203 to client 13 input_parse: '#' ground input_parse: ' ' ground input_parse: '#' ground input_parse: ' ' ground lost client 13 session 0 destroyed writing 203 to client 7 got 205 from client 7 writing 204 to client 7 lost client 7 got 207 from server got 203 from server got 204 from server There are some other peculiarities: With a newly created user (from which I overwrote root's .profile and .shrc, tmux works perfectly. Occasionally (twice out of the 50 or so times I've tested it), the splitting will work fine once in a session. (This happened for example when I ran ktrace on tmux, which I can also post) To explain the 'suddenly' part of the title: when I started my newly updated mysql56-server, tmux immediately exited and lost the session. Recently I changed architectures, from FreeBSD 10.0 i386 to amd64, and I am still working through shared library incompatibilities. I suspect that this could be involved, but I can't imagine how an incompatibility of this sort could result in such a specific, isolated failure.

  Read the article

• netcat/socat no response from other networking services

  - by jack

  Hi gurus First, I thought that this was Vmware problem : http://serverfault.com/questions/141838/vmware-problems-networking-no-packet-response But now, after testing on several physical machines, I realized certain services didn't return response data when using socat/netcat 1.1 which is supposed to the latest version since last updated. root@test3:~# netcat 192.168.1.2 25 220 762462a8c4d Microsoft ESMTP MAIL Service, Version: 6.0.2600.5949 ready at Fri, 12 May 2010 18:04:20 +0800 EHLO SAYHELLO VRFY TEST@LOCALHOST EHLO localhost sdfsafsd ^ root@test3:~# I've tested it on both windows and linuxes. I found no problem with telnet.

  Read the article

• Hyper-V Manager right clicking on remote VM causes MMC error

  - by Greg Bray

  I have a Windows 2008 R2 Enterprise Server with SP1 that I log into and use to manage virtual machines running on multiple HyperV servers on our domain. Sometimes when I right click on a remote VM the HyperV Manager will crash and display the following error message: If I use the Actions menu on the lower right it works just fine, but for some reason right clicking cause MMC to stop working. Is there any way to fix this issue? Here are the full details of the error message. Description: Stopped working Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: mmc.exe Problem Signature 02: 6.1.7600.16385 Problem Signature 03: 4a5bc808 Problem Signature 04: Microsoft.Virtualization.Client Problem Signature 05: 6.1.0.0 Problem Signature 06: 4ce7c9e3 Problem Signature 07: 342 Problem Signature 08: 1f Problem Signature 09: System.OverflowException OS Version: 6.1.7601.2.1.0.274.10 Locale ID: 1033 Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt

  Read the article

• SAS Array with or without expander

  - by tegbains

  Is it better to use a SAS Expander backplane for 12 drives via one SAS connection or is it better to use a SAS backplane with 3 SAS connections? This is in terms of performance, rather than expansion. This array will be setup using ZFS on a OpenSolaris via a LSI SAS controller as an iSCSI target. The two products being considered are the SuperMicro SuperChassis 826A-R1200LPB or the SuperChassis 826E2-R800LPB

  Read the article

• awstats parse of postfix mail log drops all records

  - by accidental admin

  I'm trying to get awstats to parse the postfix mail log, but it drops allmost all entries with messages like: Corrupted record (date 20091204042837 lower than 20091211065829-20000): 2009-12-04 04:28:37 root root localhost 127.0.0.1 SMTP - 1 17480 Few more are dropped with an invalid LogFormat: Corrupted record line 24 (record format does not match LogFormat parameter): 2009-11-16 04: 28:22 root root localhost 127.0.0.1 SMTP - 14755 My conf LogFormat="%time2 %email %email_r %host %host_r %method %url %code %bytesd" I believe matches the log format (and besides is the log format I've seen everywhere for awstats mail parsing). Besides, is the same entry format as all the other entries in the mail log. Whatever is left is dropped too: Dropped record (host localhost and 127.0.0.1 not qualified by SkipHosts): 2009-12-07 04:28:36 root root localhost 127.0.0.1 SMTP - 1 17152 I added SkipHosts="" to the .conf file but to no avail. I feel like awstats really has some personal quarrel with me today.

  Read the article

• Unable to use "Manage Content and Structure" after removing Project server form the SharePoint farm.

  - by Brian

  We're no longer using Office Project Server, and I've removed it from the farm in which it was installed. However, now that it's been removed, I am unable to access the "Manage Content and Structure" link on some of our SharePoint sites. I get an error indicating that SharePoint Failed to find the XML file at location '12\Template\Features\PWSCommitments\feature.xml' Anyone have an idea how to fix this?

  Read the article

• How do I set a default host for nginx?

  - by ulf

  I'm trying to figure out how to set a default host for my nginx installation. I found this article in the nginx Wiki: http://wiki.nginx.org/NginxVirtualHostExample#A_Default_Catchall_Virtual_Host Unfortunately, this doesn’t work. After restarting I get this: Restarting nginx: nginx: [emerg] unknown directive "http" in /etc/nginx/sites-enabled/catchall:1 nginx: configuration file /etc/nginx/nginx.conf test failed After removing the http directive I get this: Restarting nginx: nginx: [emerg] unknown log format "main" in /etc/nginx/sites-enabled/catchall:7 nginx: configuration file /etc/nginx/nginx.conf test failed I’m on Ubuntu 10.04.3 where I’m using the official nginx PPA. Version 1.0.9 of nginx is running.

  Read the article

• Paste a list of dates in format of "mm/dd/yy" to iWork-Numbers

  - by David.Chu.ca

  I have trouble to paste a list of strings in the format of 'mm/dd/yy' into iWork-Numbers. For example, I have a list of strings(text in VIM): 04/01/10 04/03/10 04/13/10 I copy those strings and then paste into my iWork-Numbers worksheet. The result will be: 2004-01-10 2004-03-10 04/13/10 It looks like that Numbers (mac workseet application in iWork) tries to convert the first two digits into year, then the next two into month if less than 12 and last two digits to a day, for the first two rows. For the third(04/13/10), since the middle two digits are 13 and cannot be a month, then this row is pasted as it is (actually it is what I need). Is there any way to paste whatever as they are, without any "smart date conversion"? Do I have to change settings in Numberers or Mac OS's System preference?

  Read the article

• Defragment a file or folder? Windows 7

  - by acidzombie24

  Is there a built-in way to defragment a folder? I am using VM Player so I would like my 3 GB disk image to be defragmented if possible. FYI my disk partition that the image lies in has 12 GB left and has roughly 90% of the disk used. I probably would not need a defrag but I would like to do it if it's possible.

  Read the article

• Merge LVM Partition with unallocated Space

  - by David

  I have a linux hard drive with three areas: /dev/hda1 - ext3 boot partition (20 MB) /dev/hda2 - lvm2 main partition (6 GB) unpartitioned space - 12 GB I would like to merge the unpartitioned space into the lvm2 partition known as /dev/hda2. I tried using GParted, but it does not support lvm2. What commands or utilities could I use to add the unpartitioned space to hda2 without losing my existing data?

  Read the article

< Previous Page | 212 213 214 215 216 217 218 219 220 221 222 223  | Next Page >